L2TP VPDN Config over 1X CDMA, Cisco 3660 [LNS] – PDSN [LAC]

Posted on March 5, 2008. Filed under: CDMA 1x, VPN |

4 PM…
My LNS (Cisco 3660) & PDSN have successfully to run simple L2TP VPDN
For mobile internet access service.

Here the config :

CISCO CONFIGURATION :
##########################################################
vpdn enable
vpdn ignore udp checksum (if it’s not exist, fine)
vpdn search-order domain dnis (if it’s not exist, fine)
!
vpdn-group cdma
accept-dialin
protocol l2tp
virtual-template 7
terminate-from hostname L2TP_trial-lac
local name L2TP_trial-lac
l2tp tunnel password 7 07062F4841071C161E135B54

# Wrong Password causes : Tunnel Auth Failed.

interface Loopback7
description POOL-CDMA
ip address 192.168.105.1 255.255.255.0

interface Virtual-Template7
description Virtual Interface to PDSN-LAC
ip unnumbered Loopback7
peer default ip address pool cdma
ppp authentication chap callin
ppp chap password 7 020F0A5F04080A32454F5941

# No IP Address Virtual Access never come up.
# Ensure LNS password = LAC Password

ip local pool cdma 192.168.105.2 192.168.105.254
############################################################

a. rahman isnaini rangkayo sutan

Make a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Liked it here?
Why not try sites on the blogroll...

%d bloggers like this: